奥地利EAT E-Glo 真空管唱头放大器

终情于黑胶仿真音源产品制作Euro Audio Team简称EAT厂家，先后发表顶级Forte量产型唱盘、Forte S及E-Flat黑胶盘而大获好评。其后更推出由(范登豪)及(日本寄木)代工的唱头、Graham特别设计以Phathom为蓝本的E-Go 12吋唱臂，令EAT产品更上一层楼。2013年5月份慕尼黑音展中EAT将E-Glo唱放首次曝光，8月份正式全球发售。
 
 
 这款由EAT厂方自行研发和生产的唱放，设计极为讲究，使用真空管式电路处理，总共使用每声道2枚ECC803及1枚ECC88，全由EAT自行生产的细胆作放大。电源部份是完全独立分离，体积与放大机体一样，符合高级唱放设计的屏敝要求。输入拥有MM及MC各一组，而MC输入可有70和76dB两组输出增益，方便使用较低输出，甚至低至0.2mV的动圈唱头仍能应付自如。一部使用真空管电路唱放要达到76dB增益数据表现，绝对是一项艰巨的设计任务，可见E-Glo是EAT制作团的心血结晶。
 
 
 两组的增益设定可在主机面板任意调节其输入阻抗，每组都分别有八个不同阻值供选择，MM输入也可有八个不同的电容值选择，匹配唱头就更为容易。

First shown privately to the trade at CES in Las Vegas this past January 13, E-Glo is now ready for its public debut at the Munich High End Show. E-Glo is an all-tube design completely free of semiconductors in its signal path. Its tube complement consists of the classic glassware beloved of audiophiles: four ECC83s and two ECC88s. The use of these valves will ensure that supplies of replacement tubes are always readily available, while experimentation is encouraged for those who love to fine-tune the sound of their systems by changing tubes, such as EAT's premium offerings.

In the fully-balanced input stage, we fitted a Lundahl step up transformer with an amorphous core, type LL1932. The unit's gain is 45db, plus the voltage gain of the step-up transformer. E-Glo's amplifier section uses split, fully passive equalisation, without any equalisation in global negative feedback loop, which can harm the sound.

At this level of performance, only the best components will suffice. The choice of output capacitor is the highly-praised Mundorf. All other capacitors are WIMA. Mundorf Connectors with Teflon insulation have been chosen for their unparalleled integrity.

To ensure the utmost flexibility, to ensure perfect matching to a wide range of cartridges, the E-Glo provides capacitance loading for moving-magnet types in six user-switchable steps from 47pf to 900pF. "The loading resistance for moving-coil cartridges is continuously adjustable", says Lichtenegger, "as we already have on our Phono Box RS".

Ensuring quiet operation is the use of an external power supply, connected to the E-Glo via a special 9-pin connector, familiar to those who recall the legendary Cello Palette preamplifier. Its heart is a custom-made toroid transformer. The transformer features double shielding between the primary and secondary windings. This avoids the intrusion of RFI, while acting as superior mains filter.

Separate power supplies feed the tube phono preamplifier because the best way to shield a mains transformer from electromagnetic radiation of is to distance it from the electronics. Metal shielding alone cannot perform the task as well as a separate power supply.

For the rectifying circuitry, E.A.T. fitted special diodes with noise suppressing resistors. Also employed are high-quality electrolytic capacitors, followed by a voltage regulator with capacitor multiplier. The power component is a FET transistor.

A feast for the eyes, the handsomely styled E-Glo is housed in a 435x60x250mm chassis, is valves peering through cleverly design heat sinks that recall the two spools of a reel-to-reel tape deck. Across the front section are rows of switches for instant access to all settings – no need to "get inside" to set the E-Glo for your cartridge of choice.

E.A.T.'s E-Glo is a state-of-the-art phono stage able to extract the ultimate performance from any cartridge it asked to accommodate.